{"product_id":"greensmaster-triflex-3320","title":"Greensmaster® TriFlex™ 3320","description":"\u003cp\u003eThe Greensmaster® TriFlex™ Mowers were designed to take precision cutting on a greens mower to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. Improved serviceability is another major advantage of the TriFlex™ models. The tool-free, quick-change cutting units make servicing the cutting units fast and easy and a lift-gate footrest provides easy access to the center cutting unit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eArmrests:\u003c\/strong\u003e Optional\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 12V\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBedknife:\u003c\/strong\u003e Replaceable single edged EdgeMax™ Microcut Bedknife is standard.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBedknife Adjustment:\u003c\/strong\u003e Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.0007″ (0.018 mm) bedknife movement for each position.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Style\/Type:\u003c\/strong\u003e Reel\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Type (Description):\u003c\/strong\u003e Reels are 5″ (13 cm) in diameter, 21″ (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375″ (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals\/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eClip Frequency\/Backlapping:\u003c\/strong\u003e Adjustable automatic clip control up to 2050 RPM at 2850 engine RPM. Backlapping standard.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e Ignition: Off\/Run\/Start. Throttle: Low – High Idle. Choke: Open \/ closes choke plate. Parking Brake: Off – On. Traction Pedal: Rev\/Neutral\/Forward\u003c\/p\u003e \u003cp\u003eJoystick: Raises\/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral\/mow\/transport limits for traction pedal.\u003c\/p\u003e \u003cp\u003eInfoCenter™ Diagnostics standard.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCup Holder:\u003c\/strong\u003e Standard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Accessories:\u003c\/strong\u003e 8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers \/ Brushes \/ Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Type\/Configuration:\u003c\/strong\u003e Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal\/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e Hybrid\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eElectrical System:\u003c\/strong\u003e 12-volt lead acid, group size U1, with 300 minimum CCA at 0° F and 34 minutes reserve capacity at 85° F \/ 25 amps draw. 50 amp alternator. Seat switch. Harness terminals and fuse slot available for optional lights installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEngine Cooling:\u003c\/strong\u003e Air Cooled\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel \/ Power Source:\u003c\/strong\u003e Hybrid – Gas\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel Capacity:\u003c\/strong\u003e 4.75 U.S. gal. (17.9 L)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGauges\/Instrumentation:\u003c\/strong\u003e Infocenter™. Onboard LCD shows gages, alert\/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control. Clip control setting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGrass Distribution:\u003c\/strong\u003e Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Clearance:\u003c\/strong\u003e 4.5″ (11.4 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Speed – Forward:\u003c\/strong\u003e 0 – 10 mph (0 – 16.1 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 80.83″ (205 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight of Cut Range:\u003c\/strong\u003e Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062″ – 0.297″ (1.6 – 7.5 mm). With high HOC kit, range is 0.297″ – 1.0″ (7.5 – 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHydraulic Fluid Capacity:\u003c\/strong\u003e 5.5 U.S. gal. (20.8 L)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eImplement Drive:\u003c\/strong\u003e 48V-5400 watt air-cooled brushless permanent magnet generator in parallel with 48V 9Ah battery set powers three 48V-1100 watt brushless permanent magnet reel motors with separable controller.\u003c\/p\u003e \u003cp\u003e4-12V 9Ah sealed, maintenance-free, VRLA batteries. 48-volt system is isolated from 12-volt including the frame\/chassis.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLeak Detection:\u003c\/strong\u003e Equipped with Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLighting:\u003c\/strong\u003e Optional\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMowing Speed:\u003c\/strong\u003e 0 – 5 mph (0 – 8 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 11, 14, 8\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e Off-Greens Kit (Anti-Bobbing), Tri-Roller Kit, Spiker Kit, 3WD Kit, Leak Detector, Light Kit, Seat Kit (Standard or Premium), Armrest Kit (Standard or Premium), Hydraulic Oil Cooler Kit (Gas or Diesel), 2WD ANSI-compliant Weight Kit (Gas or Diesel), 3WD ANSI-compliant Weight Kit (Gas), Spark Arrestor Kit (Gas or Diesel), Canopy, Utility Bag Kit, Seat Cover, LH Armrest, Wireless Hour Meter\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 70.84″ (180 cm) with reels\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eParking\/Service Brakes:\u003c\/strong\u003e Hand-actuated parking brake lever with two 6″ (15.2 cm) diameter drum brakes mounted on the front wheel motors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Steering:\u003c\/strong\u003e Yes\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Train (Engine Description):\u003c\/strong\u003e Briggs \u0026amp; Stratton® Vanguard® 23hp (17.2kW) @3600 rpm, 2-cylinder, air cooled, gasoline engine governed to 2920 rpm high idle, 1650 rpm low idle.\u003c\/p\u003e \u003cp\u003eDisplacement: 38.3 cu-in. (627 cc)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Length:\u003c\/strong\u003e 98″ (249 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReel Diameter:\u003c\/strong\u003e 5 in. (12.7cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReel\/Cylinder Drive:\u003c\/strong\u003e Electric\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRollers:\u003c\/strong\u003e Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller.\u003c\/p\u003e \u003cp\u003eRear: Steel full, 2″ (5.1 cm) diameter with sealed bearings and through-shaft.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSafety\/Operator Safety:\u003c\/strong\u003e Sound level of 80 dB(A) at operator’s ear under normal conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStarting:\u003c\/strong\u003e Key Start\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSteering System Description:\u003c\/strong\u003e No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Front:\u003c\/strong\u003e 19″ x 10.5″ – 8″, 4-ply, Smooth Tread\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Rear:\u003c\/strong\u003e 19″ x 10.5″ – 8″, 4-ply, Smooth Tread\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive:\u003c\/strong\u003e 2WD\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive (System):\u003c\/strong\u003e 2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTransport Width:\u003c\/strong\u003e Outside at Tires: 61″ (154.94 cm)\u003c\/p\u003e \u003cp\u003eOutside at Reels: 70.84″ (180 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,257 lbs. (570 kg)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWheelbase:\u003c\/strong\u003e 47″ (119 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWidth of Cut:\u003c\/strong\u003e 59″ (150 cm)\u003c\/p\u003e","brand":"MK store","offers":[{"title":"Default Title","offer_id":47547306836157,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/8331\/8205\/files\/Small_931036a0-55c0-4c29-be9d-d00c681263e2.jpg?v=1783341305","url":"https:\/\/kingranchag.com\/products\/greensmaster-triflex-3320","provider":"My Store","version":"1.0","type":"link"}